Luxul XWR-1750 User Manual download pdf (Page 24)

XWR-1750

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

LUX-UG-XWR-1750 Vers: 022515

Save: This button is used to Save the conﬁguration changes made on this page.

Once you have clicked Save, you may move to other pages in the Router setup.

Most changes will require a Reboot to allow the changes to take effect.

Reboot: This button is used to Reboot the Router after making conﬁguration

changes; or can be used to Reboot the Router for any reason.

Cancel: This button Cancels any changes made on this page.

NOTE: After making any changes to Dynamic DNS you must click the Save

button to Save your changes, then you must click the Reboot button

for the changes to take effect. You can click the Save button and

proceed to other pages without losing your conﬁgured changes.

3.3.4 Routing

This page displays the Routing Table of the Router.

Select the menu Network>>Routing to display the following page:



Active Routes: Displays the Active Routes on the Router.

Destination IP: Displays the Destination IP Address or IP Range of the Route.

Subnet Mask: Displays the Subnet Mask of the Destination IP.

Gateway: Displays the Gateway to which the Router forwards the connection.

0.0.0.0 forwards to the router itself, whereas a speciﬁed IP forwards to another

Network (i.e. the Internet).

Metric: Displays the number of Hops needed to connect to this Route in most

cases this will be 0.

Interface: Displays the Interface of the Router used for the speciﬁed Route (i.e.

eth0 speciﬁes WAN 1 and br-lan speciﬁes Local Network).

3.4 Wireless

There are three submenus in the Wireless menu: Settings, Proﬁles and WPS. Click a

submenu to view and/or modify the corresponding settings.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 51 52

No comments

Luxul XWR-1750 User Manual Page 24