Luxul XWR-1750 User Manual download pdf (Page 32)

XWR-1750

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

LUX-UG-XWR-1750 Vers: 022515

WPA Passphrase: When selecting WPA or WPA2 security two new options will

appear. The second is WPA Passphrase, which allows you to set the Passphrase used

to connect to the SSID. WPA Passphrases must be a minimum of 8 to a maximum

of 63 Characters and can contain Letters (capitol and lowercase), Numbers, Special

Characters and Spaces.



Guest DHCP: Displays the Guest Network DHCP Server settings of the Router.

Enable DHCP Server: Allows you to Enable or Disable the Routers DHCP Server.

Enabled is the default setting.



DHCP Range: Displays the DHCP Pool settings of the Router. Settings can be viewed

or modiﬁed here.

Start: Allows you to set the Starting IP Address of the DHCP Pool. 192.168.10.100 is

the default setting.

End: Allows you to set the Ending IP Address of the DHCP Pool. 192.168.10.200 is the

default setting.

Lease Time (hours): Allows you to set the number of Hours for which the DHCP

Lease issued to the Client Device is valid before requiring a DHCP Renew. 12 Hours

is the default setting.

Save: This button is used to Save the conﬁguration changes made on this page.

Once you have clicked Save, you may move to other pages in the Router setup.

Most changes will require a Reboot to allow the changes to take effect.

Reboot: This button is used to Reboot the Router after making conﬁguration

changes or can be used to Reboot the Router for any reason.

Cancel: This button Cancels any changes made on this page.

NOTE: After making any changes to the Guest Network you must click the

Save button to Save your changes, then you must click the Reboot

button for the changes to take effect. You can click the Save button

and proceed to other pages without losing your conﬁgured changes.

NOTE: WPA/WPA2 with TKIP&AES Encryption Security mode is

recommended for high turnover environments like Restaurants or

Hotels. This mode covers the widest range of devices.

NOTE: WEP Security is not recommended due to the Security being

inherently insecure. WEP is only recommended when devices do not

support WPA.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 51 52

No comments

Luxul XWR-1750 User Manual Page 32