Luxul XMS-1024 User Manual download pdf (Page 11)

User Guide

1111

Attaching the Rubber Feet to the XMS-1024

4.3 Network Connections:

The XMS-1024 supports 10/100/1000 Mbps Ethernet; 10/100 Mbps half/full-

duplex mode and 1000 Mbps full-duplex mode. All RJ-45 ports support Auto MDI/

MDIX and can be used as ordinary ports or as Uplink ports. Any RJ-45 port can be

used to connect the XMS-1024 to an Ethernet enabled device (including servers,

routers, and other switches) without a crossover cable.

The XMS-1024 offers 2 shared SFP optical module expansion ports. Once the

Gigabit SFP optical modules are inserted, these interfaces can support optical ﬁ ber

cables to extend the Gigabit network up to 49 miles—enabling the network to

extend beyond the 300 foot limitation of twisted pair Ethernet.

For the RJ-45 ports, Category-5, super Category-5 or Category-6 unshielded twisted

pair (CAT5/CAT5e/CAT6 UTP) should be used. For best results, it is recommended

that Category-6 shielded twisted pair be used to ensure stable data transmission at

1000 Mbps.

Optical ﬁ ber/cable should be selected based on the wavelength of the SFP optical

module to be used.

Make sure only one Uplink channel exists between switches or between the XMS-

1024 and a router. Otherwise, loops can occur and result in network failure.

4.4 Default IP Address

The XMS-1024 default IP address is 192.168.0.2. This address can be changed.

However, for hassle free installation of other plug and play Luxul devices, it is

recommended that the default IP value be maintained.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

No comments

Luxul XMS-1024 User Manual Page 11