Luxul XMS-1024 User Manual download pdf (Page 8)

User Guide

2.2 LED Indicators

Each port has one numbered Link/Activity LED and one 1000 Mbps LED. The SFP in-

terface shares the LED indicators with the corresponding Ethernet Port. In addition,

there is one System LED and one Power LED, as well as a Reset button to reboot the

device or restore factory default settings.

LED Indicators

The green LED indicators show the working status of the switch. The following

table describes the LED functionality:

Indicator

Name

Description

Power

On This LED indicates that there is power to the XMS-1024

Off If LED is off, check power connections and on/off

switch at the back of the unit.

Link/Act

On The Link/Activity LED of the port will be on if there is

a device connected to the port.

Flashing The Link/Activity LED ﬂ ashes when a port is receiving

or transmitting data.

Off There is nothing connected to the port.

1000 Mbps

On The 1000 Mbps LED will come on if a device capable

of 1000Mbps is connected to the port.

Off If a port has no device connected or it is not a 1000

Mbps capable device, the 1000 Mbps LED will be off.

SYS

On Indicates that the XMS-1024 is running normally.

Flashing Indicates that the XMS-1024 is restoring default

settings.

Off Indicates that the XMS-1024 is in startup and initializa-

tion process or is not on.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

No comments

Luxul XMS-1024 User Manual Page 8