Luxul XMS-1024 User Manual download pdf (Page 14)

User Guide



Subnet Mask: 255.255.255.0 by default



Gateway: 0.0.0.0 by default



MAC Address: MAC address of the switch



ARL Aging Time: Aging time of the MAC address table, 300 seconds by default

5.3 Port Settings

In this screen you can set the operating mode of each port. Six working modes

are available for any port: 10 Mbps half-duplex, 10 Mbps full-duplex, 100 Mbps

half-duplex, 100 Mbps full-duplex, 1000 Mbps full-duplex and auto negotiation.

By default, the auto negotiation mode is enabled for all ports. In this mode, upon

switch power up, each port automatically communicates and negotiates with its

connected device, to determine the optimal operating mode. For other operating

modes, manual setting is required and the settings should match the operating

mode of the connected device; otherwise communication may fail. Port settings

also affect the port mirroring and Trunk group functions.



5.3.1 Port



5.3.2 Rate Limit



5.3.3 Storm Control



5.3.4 Statistics

5.3.1 Port



Port Conﬁ guration: Basic port conﬁ guration options for the XMS-1024 include

port enable/disable, operating mode and ﬂ ow control. The following describes

the conﬁ guration functionality:



Port: Displays the corresponding port number for viewing or changing settings.

All 24 10/100/1000 Mbps Ethernet ports are available for conﬁ guration.



Admin: Either enables or disables the corresponding port. If “Disable” is

selected, the port is no longer operational.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

No comments

Luxul XMS-1024 User Manual Page 14